Fully Automatic Stacking Machine

This equipment completes automatic feeding, stacking, adhesive and automatic unloading of lithium battery electrode. The cathode and anode electrode are loaded by the material box into the stacking machine through the automatic conveying line; the separator is automatically corrected by the active unwinding of the motor, after the tension mechanism, introduce the lamination stage, the lamination table drives the separator to move back to the left and right station, to place the electrode, the manipulator suction cup mechanism shall remove the cathode and anode electrode plates from the material box respectively, after precise positioning on the CCD positioning platform and then stacked on the stacking table, there are 2 sets of pressure tools on the stacking table; after the completion of the stacking, electrode removal by a robotic gripping mechanism, cut off the separator and transfer to the adhesive station, automatic adhesive; at the same time, blow the tail of the separator to the other side to start the automatic stack of the lower electrode, put the electrode into the electrode tray into the delivery line, and transfer it to the next working procedure. | This equipment is primarily used for the Z-stacking process of prismatic lithium-ion battery cells.1.High precision alignment of electrode sheets.2.Active unwinding of separator with tension control, integrated module alignment, and static elimination.3.High reliability, with high-precision and high-speed components secured by pins.4.Dust control: effective dust collection mechanisms installed in the material boxes and secondary positioning; non-metallic suction cups; isolation between positive and negative material boxes and secondary positioning to prevent cross-contamination.5.Material box oscillation, splitting brush, and servo-driven robotic arm for electrode sheet separation, with ultrasonic sensors to detect missing sheets.